Code-3 Twist and Lock Hide-A-Blast Uživatelský manuál Strana 1

Read all instructions and warnings before installing and using.INSTALLER: This manual must be delivered to the end user of this equipment.INSTALLATI

10NOTES:

11NOTES:

Code 3 is a registered trademark of Public Safety Equipment, Inc. a subsidiary of Public Safety Equipment, Inc.CycleFlash is a trademark of Public S

IntroductionThe HB Series LED light represents the latest in state-of-the-art LED warning technology. The latest in MOSFET technology and advanced des

Unpacking and Pre-installationRemove the product from the box and examine the unit for any shipping damage. Report any damage to the carrier immediate

1. First, carefully plan the installation so that the HB Series LED Lights will not interfere with the mounting or operation of the vehicle's exi

5IMPORTANT: To extend the power (+) and ground (-) wires, use the following as a guide.1 to 10 ft. use 20AWG wire10 to 50 ft. use 18AWG wirePattern Se

FLASH PATTERN SELECTIONFLASH MODEAny one of the 20 Flash Patterns may be selected by using the blue wire to scroll through the pat-terns. Touch the b

TROUBLESHOOTING GUIDE7External fuse blows Light heads do not ash Incorrect ash patternFlash patterns change continuously 1. Power input wires shorte

Installation & Mounting-NGPI Twist Lock VersionStep-1. Locate the NGPI light bulb plug (see Figure 1).Step-2. Remove the NGPI light bulb plug by r

9FIGURE 5